Linux system development – Oleg Kutkov personal blog

Data logger for UNI-T UT800 multimeters

Oleg Kutkov — Sun, 17 Jul 2022 22:42:00 +0000

I have been using my uni-t ut804 bench multimeter for a while. My current tasks requires collecting different kinds of measurements for further analysis. I decided to connect my multimeter to a computer for data capture. On the back panel of the multimeter, there are two communication ports: USB type B and RS232. I don’t have a spare RS232…

Continue Reading→

Writing a PCI device driver for Linux

Oleg Kutkov — Wed, 06 Jan 2021 23:05:57 +0000

In this article, I want to discuss some basics of the Linux PCI/PCIe drivers development. I think this issue is not properly covered, and some existing information is might be outdated. I will show basic concepts and important structures, and this is might be a good beginner guide for newbie driver developers. The PCI bus is the most popular way…

Continue Reading→

Satellite LNB controller with GUI interface

Oleg Kutkov — Tue, 15 Dec 2020 00:54:15 +0000

Satellite LNB are quite cheap and easy to get devices. There are different models for different bands (C, Ku, and Ka) with different characteristics like SNR, noise figure, etc. Typically those devices are used with TV Set-top boxes. More interesting is that LNB can be easily connected to an SDR receiver. LNB is a simple frequency down-converter with an output…

Continue Reading→

C++ in Linux kernel

Oleg Kutkov — Sat, 09 Nov 2019 22:52:36 +0000

Linux kernel is written in C (and in Assembly in platform-specific portions) language. C language is the only language allowed to write kernel modules. And there is no problem in most cases. But sometimes, some stranger things may be required. Let’s see how to use C++ for the Linux kernel modules. Of course, it’s not a common situation. But imagine…

Continue Reading→

Printing sk_buff data

Oleg Kutkov — Wed, 16 Oct 2019 22:41:31 +0000

Sometimes when working with network packets inside the Linux kernel, it might be very useful to print packet contents to see what is actually going on. Here I’m describing how to print packet from sk_buff structure and analyze this data with Wireshark. In this short note, I will not describe capturing the packets inside the kernel but only show how…

Continue Reading→

Modifying Linux network routes using netlink

Oleg Kutkov — Wed, 28 Aug 2019 23:14:11 +0000

Last time we talked about getting a Linux routing table with a simple Netlink code. Now it’s time to do more interesting stuff. Let’s add and delete some routes using the power of the Netlink! At the end of this article, we will create a command-line utility with syntax similar to ip route command, which can add and delete custom…

Continue Reading→

Simple logger with STDOUT, Files and syslog support for C projects in Linux

Oleg Kutkov — Mon, 25 Mar 2019 00:24:05 +0000

In this little note, I want to describe a simple logging module for C programs in Linux. I’m using this code for years in my projects. This module supports different types of output “targets” – files, syslog, and stdout. Every printed message is the preceded name of the program, current date/time, type of the message – debug/error/warning/etc. This is very…

Continue Reading→

Getting Linux routing table using netlink

Oleg Kutkov — Sun, 24 Mar 2019 01:42:51 +0000

In the previous article, we discussed the monitoring of the network interfaces using Netlink. Now it’s time to do something more complex and interesting. Let’s discover how to get and print the system routing table like “ip route” command. The routing table is a runtime in-memory data structure that stores the routes (and in some cases, metrics associated with those…

Continue Reading→

Simple Linux character device driver

Oleg Kutkov — Wed, 14 Mar 2018 13:24:01 +0000

A character device is one of the simplest ways to communicate with a module in the Linux kernel. These devices are presented as special files in a /dev directory and support direct reading and writing of any data, byte by byte, like a stream. Actually, most of the pseudo-devices in /dev are character devices: serial ports, modems, sound, and video…

Continue Reading→

Connecting HTU21D temperature/humidity sensor to the Raspberry PI using simple C i2c interface

Oleg Kutkov — Wed, 21 Feb 2018 12:20:17 +0000

Previously in my projects, I’m always used well-known DHT22 (AM2302) temperature/humidity sensors. But I found that these sensors are not very stable and subject to hung. In my case, this device is worked for about two weeks and then stops responding until the power is rebooted. This is absolutely unacceptable on some distant and autonomous devices. After some googling, I…

Continue Reading→